UEditor编辑器上传图片是自动提取的，但是图片没有水印功能，下面小编和各位一起来看看。

UEditor编辑器没有上传图片加水印的功能，需要进行二次开发，本例是在PHPCMS系统中对百度编辑器进行二次开发，添加上传图片加水印功能。

首先打开UEditor编辑器文件目录的php文件夹，打开Uploader.class.php，把PHPCMS添加水印的方法复制过来，加到这个类所有成员方法最后面，然后进行修改如下：

//图片加水印 public function watermark($source, $target = '', $w_pos = '', $w_img = '', $w_text = '99danji',$w_font = 8, $w_color = '#ff0000') { $this->w_img = 'watermark.png'; $this->w_pos = 9; $this->w_minwidth = 400; $this->w_minheight = 200; $this->w_quality = 80; $this->w_pct = 85;

$w_pos = $w_pos ? $w_pos : $this->w_pos; $w_img = $w_img ? $w_img : $this->w_img; //if(!$this->watermark_enable || !$this->check($source)) return false; if(!$target) $target = $source; //$w_img = PHPCMS_PATH.$w_img; //define('WWW_PATH', dirname(dirname(dirname(__FILE__))); $w_img = '../../../images/water/'.$w_img; $source_info = getimagesize($source); $source_w = $source_info[0]; $source_h = $source_info[1]; //if($source_w < $this->w_minwidth || $source_h < $this->w_minheight) return false; switch($source_info[2]) { case 1 : $source_img = imagecreatefromgif($source); break; case 2 : $source_img = imagecreatefromjpeg($source); break; case 3 : $source_img = imagecreatefrompng($source); break; default : return false; } if(!empty($w_img) && file_exists($w_img)) { $ifwaterimage = 1; $water_info = getimagesize($w_img); $width = $water_info[0]; $height = $water_info[1]; switch($water_info[2]) { case 1 : $water_img = imagecreatefromgif($w_img); break; case 2 : $water_img = imagecreatefromjpeg($w_img); break; case 3 : $water_img = imagecreatefrompng($w_img); break; default : return; } } else { $ifwaterimage = 0; $temp = imagettfbbox(ceil($w_font*2.5), 0, PC_PATH.'libs/data/font/elephant.ttf', $w_text); $width = $temp[2] - $temp[6]; $height = $temp[3] - $temp[7]; unset($temp); } switch($w_pos) { case 1: $wx = 5; $wy = 5; break; case 2: $wx = ($source_w - $width) / 2; $wy = 0; break; case 3: $wx = $source_w - $width; $wy = 0; break; case 4: $wx = 0; $wy = ($source_h - $height) / 2; break; case 5: $wx = ($source_w - $width) / 2; $wy = ($source_h - $height) / 2; break; case 6: $wx = $source_w - $width; $wy = ($source_h - $height) / 2; break; case 7: $wx = 0; $wy = $source_h - $height; break; case 8: $wx = ($source_w - $width) / 2; $wy = $source_h - $height; break; case 9: $wx = $source_w - $width; $wy = $source_h - $height; break; case 10: $wx = rand(0,($source_w - $width)); $wy = rand(0,($source_h - $height)); break; default: $wx = rand(0,($source_w - $width)); $wy = rand(0,($source_h - $height)); break; } if($ifwaterimage) { if($water_info[2] == 3) { imagecopy($source_img, $water_img, $wx, $wy, 0, 0, $width, $height); } else { imagecopymerge($source_img, $water_img, $wx, $wy, 0, 0, $width, $height, $this->w_pct); } } else { if(!empty($w_color) && (strlen($w_color)==7)) { $r = hexdec(substr($w_color,1,2)); $g = hexdec(substr($w_color,3,2)); $b = hexdec(substr($w_color,5)); } else { return; } imagestring($source_img,$w_font,$wx,$wy,$w_text,imagecolorallocate($source_img,$r,$g,$b)); }

switch($source_info[2]) { case 1 : imagegif($source_img, $target); break; case 2 : imagejpeg($source_img, $target, $this->w_quality); break; case 3 : imagepng($source_img, $target); break; default : return; }

if(isset($water_info)) { unset($water_info); } if(isset($water_img)) { imagedestroy($water_img); } unset($source_info); imagedestroy($source_img); return true; }

public function check($image) { return extension_loaded('gd') && preg_match("/\.(jpg|jpeg|gif|png)/i", $image, $m) && file_exists($image) && function_exists('imagecreatefrom'.($m[1] == 'jpg' ? 'jpeg' : $m[1])); } 对比我修改的部分，由于phpcms水印可以在后台管理设置，phpcms自带的水印方法通过读取配置文件获取路径，和读取数据库设置获取参数设置，那么这些地方需要手动进行设置。

对了，在upFile方法还要添加一段函数：

复制代码 代码如下:

if ($this->watermark) { $this->watermark($this->filePath,$this->filePath); } 然后打开UEditor百度编辑器php目录下的action_upload.php文件，加上是否添加水印的参数：

/* 上传配置 */ $base64 = "upload"; switch (htmlspecialchars($_GET['action'])) { case 'uploadimage': $config = array( "pathFormat" => $CONFIG['imagePathFormat'], "maxSize" => $CONFIG['imageMaxSize'], "allowFiles" => $CONFIG['imageAllowFiles'] ); $fieldName = $CONFIG['imageFieldName']; $watermark = true; break; 然后在后面还有一句要改成：

复制代码 代码如下:

/* 生成上传实例对象并完成上传 */ $up = new Uploader($fieldName, $config, $base64, $watermark); 这样就大功告成了，本文主要是提供思路和参考。

本文来源于广州网站建设公司与广州网站设计制作公司-广帆互动广州公司！